The chillers of the glass tempering furnace are comprised of the conveyor rollers and the upper and lower chillers. Once the glass shatters within the chiller, it can potentially cut the Kevlar Rope on the rollers, causing the glass to not be smoothly transported to the unloading table.
During the heating process of a glass tempering furnace, to ensure the furnace structure is not damaged and to maintain production efficiency, special attention should be paid to the following points…
When processing tempered glass, we sometimes encounter problems with the fragments not meeting standards. When this occurs, we need to take the following measures
Identify clear alignment marks on both the encoder's shaft and the motion shaft. These marks, typically located on the end surface or body of the shaft, ensure the correct installation position of the encoder in relation to the motion shaft.
Vibration can occur when the motor of the tempering blower and the coupling of its reducer are not concentric. In this case, we should check the concentricity of the coupling, and reinstall or replace the coupling.
The heating time of the glass tempering furnace should be adjusted according to actual conditions. The size of individual glass sheets and the number of sheets placed in a single furnace cycle can significantly affect the heating duration.
When there are discrepancies in the curvature settings of the bending chillers in the glass tempering furnace, or when the glass deviates during motion, it can cause the bent tempered glass to have inaccurate curvature and its diagonal corners to not lie on the same plane.
White haze can appear in the center of tempered glass during the glass tempering process for several reasons:If the tempered glass oscillates too quickly inside the glass tempering furnace, white haze may occur……
The main operating station of the glass tempering furnace and the control boxes for the critical components are each equipped with emergency stop buttons. Should an emergency arise, the operator can instantly halt all driving operations of the glass tempering furnace by pressing these buttons.
