Fabricating debris on the roller conveyor of the glass tempering furnace will cause regular scratches in the glass surface. As the location of fabricating debris is fixed, the scratches on the glass will show a regular pattern. We can check the state of the rollers in the heating oven and cooling section and tackle the issue accordingly.
If the glass is unevenly heated in the glass tempering furnace, the glass warps and form a spherical surface. It may result in its edges and corners being chipped when colliding with the ceramic roller conveyor during oscillating movement.
Differences in the wind pressure at different positions of the chiller will cause the tempered glass in the corresponding areas to have different flatness . Take the following measures to tackle the issue
As the glass temperature is relatively low when it just entered the glass tempering furnace, the temperature of its lower surface will be affected by both the ceramic rollers with which it gets in touch and the bottom heating elements, while the upper surface of the glass is only affected by the upper heating elements of the glass tempering machine.
Buying a glass tempering furnace is the largest investment for a glass processing enterprise. It could determine an enterprise's market value, the distribution of customer base, and overall profitability. This article intends to help those who plan to invest in glass tempering machine to properly evaluate the operating environment and their own situations before making a purchasing decision.
During glass tempering process, in cases the door of the glass tempering furnace is not opened in time and the heating time is too long, or the primary conveyor of the glass tempering machine stops, or other malfunctions occur, the sheet glass in the glass tempering furnace may melt and solidify on the surface of the ceramic rollers. The proper way to tackle the situation is as follows:
LandGlass B-type bending glass tempering furnace production modes are as follows: 1. Single-station production mode, 2. Multi-station production mode, 3. Continuous production mode.
During the glass tempering process, because of the special properties of the glass coating material, the coated surface of the Low-E glass has higher requirements on the cleaning brushes in the washing machine unit.